PFG180-120 type Roller Presser
Technical document of PFG180-120 type roller presser
A. Technical parameters
1、Equipment name PFG180-120 type roller presser
2、Usage grinding cement clinker
3、QTY 1pc
4、Material name cement clinker, etc.
5、Comprehensive moisture ≤1~1.5%
6、Inlet granularity 5% is no more than 80mm, 95% is no more than 50mm
7、Outlet granularity over 60% is less than 2mm,20% is less than 0.09mm
8、Capacity Average 650~800 t/h
Max. 800 t/h
9、 Working system Continuous
10、Power supply Voltage 10000V
Motor type YRKK630-6
11、Layout Indoor
12、Required power 2×1250 kW
13、Roller diameter 1800mm
14、Roller width 1200mm
15、Roller rotating speed 18.5 r/min
16、Equipment weight ~235.0 t
17、Manufacturer Jiangsu Pengfei Group Co.,Ltd
B. Supply range & specification of main spare parts
Supply range:
1、Motor: including bracket, feeding device, torque support, hydraulic system, lubricating system;
2、Main driving section: including motor, reducer, coupling, basement;
3、Others; including starter of motor, roller controller, foundation bolt, cooling device, wear-resistant welding rod for repair welding 10kg, random special tools, etc. Dtailed supply range please refers to general drawing of Jiangsu Pengfei Group Co., Ltd, each equipment mainly includes:
1)Main bracket
2)Main shaft
3)Bearing base
4)Main shaft
5)Reducer
6)Main motor
7)Driving shaft
8)Motor base
9)Hydraulic system
10)Foundation bolts
11)Automatic dry oil lubricating system (including motorized filling pump)
C. Technical documents & schedule supplied by seller
1、General assembly drawing of roller press 2sets
2、Instruction of roller press 1set
3、Packing list 1set
|